4 to 20mA TEMPERATURE TRANSMITTERS ISOLATED, NON-ISOLATED, 0 to 10Vdc output, Thermocouples, RTD Pt100 input, Thermocouple Components  

Smart Micro-Processor Based Programmable Temperature Transmitters

Heaters
Thermocouples
Temperature Transmitter
RTD Sensor Probes
Thermistor Probes
 
Temperature Controllers
Temperature Indicators
Temperature & Humidity
Data Acquisition
High Temp.Flexible Tubings
Heater Plugs & Accessories
Key Holder & Nameplate Holder
 
 
  MICROPROCESSOR BASED PROGRAMMABLE TEMPERATURE TRANSMITTERS
is the reliable way to transmit a signal to the readout and control system.The transmitter
will take the low-level signal from the thermocouples, RTD or 0 to 50mV input and convert it to a strong
high-level signal 4-20mA or 0 to 10Vdc output, which can be transmitted over long distances without compromising or weaken the signal. The signal can be sent to the readout and control system with twisted nickel plated copper wires instead of using high cost thermocouple wires when using a direct wiring system. Direct wiring system can cause problems, especially when running over long distances. Signal from the thermocouple or RTD are very weak and can be easily affected by RFI and EMI interferences. These transmitters are robust and immuned to RFI and EMI interferences. Further more, it can be programmed to accept thermocouple, Rtd or 0-50mV input. It also allow upscale and downscale temperature setting. User can set error correction and sensor failure detection if desire with ease.

Non-isolated transmitter for use with ungrounded probes.

Isolated transmitter should be used with grounded probe.

 
 

Non isolated temperature transmitter with RS232 programming cable, software c/w head mounted probe J/K/T calibration. Package price at Part# TxBlockpack $138.00CAD

Isolated temperature transmitter with RS232 programming cable, software c/w head mounted probe J/K/T calibration. Package price at Part# TxIblockpack $210.00CAD

 
For transmitter price with probe Click Here
PRINT CALIBRATION FORM CLICK HEREgoto>>1 2 3 4
HEAD MOUNT NON-ISOLATED TEMPERATURE TRANSMITTER 4-20mA OUTPUT
PART# TxBlock
$48.00 CAD 4-20mA Thermocouple J K R S T N E B ,Pt100, Voltage

Info.

HEAD MOUNT ISOLATED 4-20mA Output TEMPERATURE TRANSMITTER
PART# TxIsoBlock
$130.00 CAD

Info.

NON-ISOLATED DIN RAIL TEMPERATURE TRANSMITTER 4 to 20mA PART# TxRAIL4-20

Info.
ISOLATED DIN RAIL TEMPERATURE TRANSMITTER 4-20mA OUTPUT
PART# TxISoRAIL 4-20
$130.00 CAD
Info.
NON-ISOLATED DIN RAIL TEMPERATURE TRANSMITTER 0 to 10Vdc OUTPUT PART# TxRAIL0-10Vdc

ISOLATED DIN RAIL 0-10Vdc Output TEMPERATURE TRANSMITTER PART# TxISoRAIL0-10Vdc $150.00 CAD

Info.
Info.
DigiRail - Signal conditioning and digital transmitter

The DigiRail line of smart transmitters with Modbus RTU comunication interface provide a simple way for integrating analog or digital signals to supervisory systems. Featuring up to two universal input analog signal channels they are the most economical way to deliver analog inputs to PLC´s and SCADA systems. The input signals are isolated from power thus protecting the electrical instruments by eliminating ground loop effects. This reduces substantially the undesirable interferences and instabilities ...

Info.

TEMPERATURE TRANSMITTER CONFIGURATION ADAPTOR RS232
AND CD SOFTWARE
PART# TxConfigA $50.00

Thermocouple plug, standard Male type K connectors (Round Hollow Pins) Part # TCPMLE-K $3.50

Thermocouple jack, standard female type K adaptor (Round Hollow Pins) Part # TCPFLE-K $3.50

Standard male TC plug type J connector (Round Hollow Pins) Part # TCPMLE-J $3.50

Standard female TC plug Type J connector (Round Hollow Pins) Part # TCPFLE-J $3.50

Thermocouple Mini Male plug type K (Flat Pins) Part # MTCPMLE-K $3.50

Thermocouple Mini Female jacks type K (Flat Pins) Part # MTCPFLE-K $3.50

Thermocouple Mini Male plug type J (Flat Pins) Part # MTCPMLE-J $3.50

Mini Female TC jack type J adaptor (Flat Pins) Part # MTCPFLE-J $3.50

Standard Aluminum Thermocouple Heads 1/2" NPT Process x 1/2" NPT conduit Part# AH12 $9
Standard Aluminum Thermocouple Heads 3/4 x 3/4"NPT Part# AH34 $7
Small Aluminum Thermocouple Head 1/4 process x 3/8 conduit NPT Part# SAH $7
Explosive Proof Aluminum Thermocouple Heads 1/2" X 1/2" NPT Part# XAH $15
Explosive Proof Stainless Steel Thermocouple Heads 3/4" X 3/4" NPT Part# SXH $50

Ceramic terminal block for thermocouple head or RTD connections (Alumina ceramic with 6 duplex terminals screws) Part#Part# CTB-TC $5.00CAD

goto>>1 2 3 4