RTD WITH HEAD SENSOR PROBE 1/4" NPT, 1/2 NPT, 3/4" NPT HEX NIPPLE, BUSHING FITTING 
Class A: ±0.06%
Class B: ±0.12%
Class C: ±0.24%
JIS C 1604 or IEC751 or DIN43760 ~ -50~500°C or Class A -50~750°C TCR 3850PPM/°C
RTD PROBE WITH HEAD
RTD PROBE SENSORS
Thermocouples
Temperature Transmitter Probes
Thermistor Probes
Heaters
Temperature Controllers
Temperature Indicators
Timers
Counters
Relays
Temperature & Humidity
Data Acquisition
Flexible Tubings
Controller Housing & Face Plates
Plugs & Accessories
 
 
 

RTD PRT Resistance Temperature Detectors
RTDs operate by exhibiting an increase in resistance with an increase in temperature in
the order of 0.385%/C for a platinum RTD. Platinum RTDs are commonly used because
of their accurracy and wide temperature range (-50 to 500°C and -50 to 750°C).

 
6" to 12" Long Probe rtd Pt100 Class B, 3/16", 1/4" O.D. tube or larger
 

RH1= Model

N12= SS316 1/2" NPT nipple

L6= 6 inches sheath length

14D= 1/4" sheath O.D.

PT100B= Class B Pt100 chip

 

AH= Aluminum Head

SX= Explosion Proof Stainless Steel Head

SHA= Small Aluminum Head

AX= Explosion Proof Aluminum Head

 

RH1-N12-L6-14D-PT100B-AH Industrial rtd probe Pt100 class B with TCR of 3850 PPM/°C. 6" long probe, 1/4" O.D. SS316 sheath, 1/2" NPT conduit fitting and 1/2" NPT nipple mounted to cast aluminum head.

RH1-N12-L6-14D-PT1000B-AH with class B 1000 Ohms chip

RH1-N12-L6-14D-PT1000B-SAH with small aluminum head

RH1-N12-L6-14D-PT100C-AH with Class C Pt100

$65.00

$65.00

Reg$95.00

$63.00

 

$58.00

RR1-N12-L6-14D-PT1000B Replacement probe

RR1-N12-L6-14D-PT100B with Class B Pt100

RR1-N12-L6-14D-PT100C with Class C Pt100

Reg$75.00

$50.00

$55.00

$48.00

 
RH1-N12-L12-14D-PT100B-SL-AH with spring loaded tension, adaptor cap and M12x1.75 bayonet adaptor.

Reg$97.00

$67.00

 
RH1-N-12-L6-14D-PT100B-SSC1-1/2-AH with 1/2" NPT SS316 compression fitting.

Reg$125.00

$70.00

 

RH1-N12-L6-14D-PT100B-SSC2-1/2-AH with 1/2" NPT heavy duty SS316 compression fitting.

Available in 3/4"NPT Compression fitting

RH1-N12-L6-14D-PT100C-SSC2-1/2-AH with Class C Pt100

Reg$125.00

$70.00

$70.00

$68.00

 

RH1-N12-L6-14D-PT100B-FL-SAH with SS316 compression flange and small aluminum head.

RH1-N12-L6-14D-PT100B-FL-AH with SS316 compression flange and standard aluminum head.

$95.00

Reg$180.00

$99.00

 

RH2-N12-L6-14D-PT100B-AX Industrial rtd probe Pt100 class B with TCR of 3850 PPM/°C. 6" long probe, 1/4" O.D. SS316 sheath, 1/2" NPT conduit fitting and 1/2" NPT nipple mounted to explosion proof cast aluminum head.

RH2-N12-L6-14D-PT1000B-AX with class B 1000 Ohms chip

Available in 3/4"x3/4" NPT

Reg$98.00

$78.00

 

RH3-N12-L6-14D-PT100B-SX Industrial rtd probe Pt100 class B with TCR of 3850 PPM/°C. 6" long probe, 1/4" O.D. SS316 sheath, 1/2" NPT conduit fitting and 1/2" NPT nipple mounted to explosion proof stainless steel head.

RH3-N12-L6-14D-PT1000B-SX with class B 1000 Ohms chip

Available in 3/4"x3/4" NPT

Reg$195.00

$170.00

 

RH4-N12-L6-14D-PT100B-SL-AH Spring loaded Industrial rtd probe Pt100 class B with TCR of 3850 PPM/°C. 6" long probe, 1/4" O.D. SS316 sheath, 1/2" NPT conduit fitting and 1/2" NPT process nipple mounted to cast aluminum head. Tube travel 1/2" with spring tension. Design to use with thermowell or non pressurized applications. Mounting screws not shown on photo.

Available in 3/4"x3/4" NPT

 

RH4-N12-L6-14D-PT100B-SL-AX with explosion proof aluminum head.

$65

 

Reg$125

 

 

$65

 

 

$75

 

RHR-12SB-L12-14D-PT100B-AH Reduced probe assemblies Pt100 class B with TCR of 3850 PPM/°C. 12" long probe, 1/4" O.D. SS304 sheath, 3/4" NPT conduit fitting and 1/2" NPT process hex bushing brazed to 5/8" O.D. 1/8" thick wall SS304 tube.

RHR-L12-14D-PT100B-AH without hex bushing

 

RHR-34SB-L12-14D-PT100B-AH with 3/4" NPT hex bushing

 

RHR-12SB-L12-14D-PT100C-AH with Class C Pt100

Reg$175.00

$145.00

 

$140.00

 

$150.00

 

$143.00