|
| |
| | | 4-20mA
Temperature Transmitter output, 0-10Vdc, Head mounted, Rtd Pt100, 0-50mV and thermocouple
input type K, J, T, E, R, S | | |
| | | | MICROPROCESSOR
BASED PROGRAMMABLE TEMPERATURE TRANSMITTERS
is the reliable way to transmit a signal to the readout and control system.The
transmitter
will take the low-level signal from the thermocouples, RTD or
0 to 50mV input and convert it to a strong
high-level signal 4-20mA or 0
to 10Vdc output, which can be transmitted over long distances without compromising
or weaken the signal. The signal can be sent to the readout and control system
with twisted nickel plated copper wires instead of using high cost thermocouple
wires when using a direct wiring system. Direct wiring system can cause problems,
especially when running over long distances. Signal from the thermocouple or RTD
are very weak and can be easily affected by RFI and EMI interferences. These transmitters
are robust and immuned to RFI and EMI interferences. Further more, it can be programmed
to accept thermocouple, Rtd or 0-50mV input. It also allow upscale and downscale
temperature setting. User can set error correction and sensor failure detection
if desire with ease. Non-isolated transmitter
for use with ungrounded probes. Isolated transmitter
should be used with grounded probe. | | | | | | | | 1
2<--go
to page | | | | | | | | | |
| RHX
= Model PT100B
= 100 Ohms Class B 2C
= 2 Conductors 14D
= 1/4" O.D. sheath L12
= 12 inches long probe 304
= Stainless Steel 304 tube FEP
= Teflon insulation cable 1/2-1/2
= 1/2" NPT process, 1/2" NPT conduit 3/4-3/4
= 3/4" NPT process, 3/4" NPT conduit AH
= Cast aluminum Head TX
= Non- isolated transmitter TXI
= Isolated transmitter SX
= Stainless Steel Explosion proof head |  |  | | | |  | TxConfig
Cable Adaptor & Software Reg. $60.00 $50.00CAD | | | | | | | | RHX-PT100B-2C-14D-L12-304-FEP-1/2-1/2-AH-TX
With Non- Isolated Temperature Transmitter and c/w 12"
long probe Pt100 class B Rtd 2 wires and 1/2" NPT process, 1/2" NPT
conduit Reg.
$159.00 $99.00CAD RHX-PT100B-2C-14D-L12-304-FEP-1/2-1/2-AH-TXI
With Isolated Temperature Transmitter c/w 12" long
probe Pt100 class B Rtd 2 wires and 1/2"x1/2" NPT.
Reg. $255.00 $195.00 CAD Available
in 3/4" X 3/4" NPT with same price Reg. $250.00
$190.00CAD |  
Non-Isolated
Manual
Isolated Manual | | | | | | | RHX-PT100B-2C-14D-L12-304-FEP-3/4-3/4-SX-TX
With Non- Isolated Temperature Transmitter and c/w 12"
long probe Pt100 class B Rtd 2 wires and 1/2" NPT process, 3/4" NPT
conduit Reg.
$214.00 $163.00CAD RHX-PT100B-2C-14D-L12-304-FEP-3/4-3/4-SX-TXI
With Isolated Temperature Transmitter c/w 12" long
probe Pt100 class B Rtd 2 wires and 3/4" NPT process, 3/4" NPT conduit.
Reg. $310.00 $260.00CAD | 
| Stainless
Steel explosion proof head dIICT6 | | | | | | | | 1
2<--go to page
| | | | | | | | | | |
|
