| | |
| |  | Micro
Data Logger LogBox-DA
LogBox-DA is an electronic data logger with
two input channels, one analog and one digital. Input data is stored in the logger
internal memory, for later download to a PC for visualization and analysis in
the form of tables or graphs. The data is easily exported to spreadsheets.
The
LogChart-II is the software used to configure the logger, download and visualize
data. The logger configuration allows defining the logger operation mode, including
programming the start/stop time of data acquisition. Other parameters such as
signal input type, logging interval, multiplication factor, scale range, etc,
are easily selected through the LogChart-II software.
The LogBox-DA also provides
a signal for commanding an external power supply (battery) of a device connected
to the logger. This feature allows that external devices, such as a transmitter,
be powered only during the measurement sample time, thus extending the autonomy
of these external batteries.
| |
| | | | | | Product
Details
LogBox DA
SPECIFICATIONSChannel
1: NPN, PNP, Pulse or Dry Contact
Max. frequency: 4000 Hz or 20 Hz
Maximum
counting: 65,535 per period.
Channel 2: 0-20mA, 4-20mA, 0-50mV and 0-10Vdc
Memory
capacity: 32k or 64k readings
Interval between readings: 10 seconds to 18 hours
External
battery switch time: 0 to 10 s
Power: Internal 3.6V lithium battery (1/2 AA)
Estimated
autonomy: Over 2000 days (one daily download)
Working temperature: From –40°C
to 70°C.
Protection: IP65, IP67 and IP68 models (see lateral label on product)
Material:
ABC + PC case, Polycarbonate film;
Dimensions: 60x70x35mm
| | |  | Micro
Data Logger LogBox-AA
LogBox-AA is an electronic data logger with
two input analog channels. Input data is stored in the logger internal memory,
for later download to a PC for visualization and analysis in the form of tables
or graphs. The data is easily exported to spreadsheets.
The LogChart-II is
the software used to configure the logger, download and visualize data. The logger
configuration allows defining the logger operation mode, including programming
the start/stop time of data acquisition. Other parameters such as signal input
type, logging interval, etc, are easily selected through the LogChart-II software.
The
LogBox-AA also provides a signal for commanding an external power supply (battery)
of a device connected to the logger. This feature allows that external devices,
such as a transmitter, be powered only during the measurement sample time, thus
extending the autonomy of these external batteries. | | | Product
Details
LogBox AA
Input: 0-20mA, 4-20mA, 0-50mV and 0-10Vdc,
J range: -50 to 760 °C (-58 to 1400ºF)
K range: -90 to 1370 °C
(-130 to 2498ºF)
T range: -100 to 400 °C (-148 to 752ºF)
N range: -90 to 1300 °C (-130 to 2372ºF)
R range: 0 to 1760 °C
(32 to 3200ºF)
S range: 0 to 1760 °C (32 to 3200ºF)
B range:
150 to 1820 °C (32 to 3308ºF)
Pt100 range: -200.0 to 650.0 °C
(-328 to 1202ºF)
Memory capacity: 32k or 64k readings
Interval between
readings: 10 seconds to 18 hours
External battery switch time: 0 to 10 s
Power:
Internal 3.6V lithium battery (1/2 AA)
Estimated autonomy: Over 2000 days (one
daily download)
Working temperature: From –40°C to 70°C.
Protection:
IP65, IP67 and IP68 models (see lateral label on product)
Material: ABC + PC
case, Polycarbonate film;
Dimensions: 60x70x35mm
| |
| LogBox
DA65 | LogBox DA
IP65 Data Logger, 1 Analogue & 1 Digital | $146.00 | | |  | | | LogBox
DA67 | LogBox DA IP67 Data Logger,
1 Analogue & 1 Digital | $176.00 | | | | | | LogBox
AA65 | LogBox AA IP65 Data Logger,
2 Analogue channels | $156.00 | | | | | | | LogBox
AA67 | LogBox AA IP67 Data Logger,
2 Analogue channels | $206.00 | | | | | | | | |
|
