Data Acquisition, Logging & Supervisory Systems 

 

 BAND HEATERS AND CERAMIC HEATERS
 AIR HEATERS
 THERMOCOUPLE SENSORS
 THERMOCOUPLE HEAD MOUNTED SENSORS
 THERMOCOUPLE TEMPERATURE TRANSMITTERS
 RTD SENSORS THIN FILM ELEMENT
 RTD HEAD MTED THIN FILM ELEMENT
 TEMPERATURE TRANSMITTERS PT100
 THERMOCOUPLE ACCESSORIES
 HEATERS ACCESSORIES
 
 
 
 

DigiRail - Signal conditioning and digital transmitter

The DigiRail line of smart transmitters with Modbus RTU comunication interface provide a simple way for integrating analog or digital signals to supervisory systems. Featuring up to two universal input analog signal channels they are the most economical way to deliver analog inputs to PLC´s and SCADA systems. The input signals are isolated from power thus protecting the electrical instruments by eliminating ground loop effects. This reduces substantially the undesirable interferences and instabilities ...

 
Product Details


Analog inputs: programmable for thermocouples (J, K, T, E, N, R, S, B), Pt100, mV, V, mA.
Cold junction compensation for thermocouples and compensation for Pt100 3-wire cables.
Open loop detection for thermocouples, Pt100 and mV.
Sampling rate for 1 analog input: 10Hz for mV, V and mA. 5Hz for t thermocouples and Pt100.
Analog input resolution: 17 bits.
User defined linearization for the analog inputs.
Digital inputs: in voltage, 4 to 35V to activate. Internally limited current in 5mA.
Digital outputs: 3A / 250Vac SPDT relay, resistive load.
Power: 10 to 35Vdc, 50mA maximum current.
2-wire RS485 communication with Modbus RTU protocol. Configurable address and baud rate (1,200 to 115,200bps).
LED indicators for communication and status.
Key for resetting communication parameters to original factory default.
Accuracy (at 25°C): Pt100, mV, V and mA: ±0.15% of full scale. Thermocouples: ±0.25% of full scale.
Temperature effect: 0.003% of full scale/°C.
Cold junction compensation for thermocouples: 1°C at 25°C. ±0.05°C/°C.
Isolation: 1000Vac from inputs (analog or digital) and power or communication.
Windows based configurator software.
Dimentions: 72 x 78 x 19mm.
Mounting: 35mm DIN rail.
Working temperature: 0 to 70°C.





Flier DigiRail
PDF - 0.15 Mb



Manual DigiRail-2A
PDF - 0.49 Mb



Manual DigiRail-2R
PDF - 0.44 Mb


Manual DigiRail-4C
PDF - 0.45 Mb



Communication Manual DigiRail-2A
PDF - 0.36 Mb



Communication Manual DigiRail-2R
PDF - 0.33 Mb


Communication Manual DigiRail-4C
PDF - 0.34 Mb




 
 >>1 2 3
DISCOUNT FOR LARGE ORDER 10-40%